Wild wool for flying feet
As part of the current autumn/winter collection, we were able to introduce a very special Wildling model – the “Wolf”. Both its outer material and its lining are made of milled wool, whose temperature-regulating characteristics ensure a very comfortable environment for the shod foot.
The Schurwollwalk (tumbled new wool) that we use is purchased from Nordwolle, a company which is located on the island of Rügen and specializes in the production of high-quality functional textiles made from the wool of endangered sheep breeds. Nordwolle’s work focuses particularly on sustainability, regionalism and making a valuable contribution to wildlife conservation. That’s why the wool itself and the entire processing of this classic resource are “made in Germany”. The guest article below by Marco Scheel, General Manager of Nordwolle Rügen, discusses the question of optimal care for this model. Following his contribution you will find two additional suggestions for wool care.
Caring for Your Shoes – How to Do it Right!
by Marco Scheel, General Manager of Nordwolle Rügen
What is milled wool and where does it come from?
Milled wool comes from sheep, of course, but this fluffy breed comes with a long-lasting tradition.
Our concept is to work with the benefits of a high-tech fiber, that was perfected over millions of years of evolution, and successfully combining this, with the preservation of a very unique species.
The specific breed that provides the wool for the “Wolf” is called Grauwollige Pommersche Landschaf – or Pomeranian Greywool Sheep. It was bred on the Baltic Sea island of Rügen about 3800 (!) years ago and is one of the few breeds cultivated, especially and only for their wool.
The fishermen on Rügen Island, making their living under cold and wet conditions had to find something to keep them dry and warm for long periods of time, that would also be very durable and easy to clean.
How come wool can do it all?
Those fishermen intuitively farmed a breed with special wool qualities. First of all, there is the fibre structure. In the Pomeranian sheep, fibre thickness ranges from 20μm to 50μm. (For comparison: merino wool has a constant 20μm.) From about 35μm the individual fibers are hollow, more like a tube. This trapped air ensures that the wool is ultra light and with a cosy warmth. In addition to that, the thick fibres loosen the weave and prevent capillary action developing between the fibres. When it rains, small droplets form on the fibres and roll off on the outside like on a slate roof.
The rest is thanks to lanolin – a naturally occurring fat, that can also be found in most cosmetic products.
Since water and fat are known not to mix, it increases the water-repellent character of the fleece enormously! All these features ensure that the sheep can live well even in our rough climate on Rügen.
What to do or not to do with your shoes?
Finally, you say…the long introduction will help us understand why this wool needs a specific care.
First, the most important thing: please do not use conventional impregnating sprays on the milled wool of Wolf shoes! Those sprays are made for polyester and polyacrylic and often contain solvents to increase penetrability and water displacement. Apart from being toxic to us and the environment, they also loosen the lanolin inside the wool, so the result would probably be contrary to the desired one. Nordwolle washes the wool very gently to obtain a high level of natural lanolin in the fibres. Since this lanolin is naturally “grown”, it wears off more slowly while using the shoe than subsequently applied lanolin. A good thing that could be applied to your Wolves is a perfume-free moisturiser.
Since communication in a flock of sheep is strongly influenced by pheromones (hormonal fragrances) wool is naturally made to clean itself of all kinds of different odours so that communication is not disturbed. Nevertheless, should the Wolves step into any kind of sticky dirt, it is best to simply tap them when dried off, or gently brush the affected part. You should avoid washing the whole shoe.
* Recommended Care Instructions for Wildling Shoes’ Wolf model
As described by Marko, the wool naturally has water-repellent characteristics – so additional impregnation is not necessary. However, the microfibre part of the Wolf should be impregnated or waxed before the first use and then at regular intervals. Please make sure that the impregnating spray does not come into contact with the wool. If the lanolin content decreases after prolonged use, which becomes noticeable by the fact that the milled wool leaks water and the shoe feels moist from the inside, the shoes can be lubricated. There are several ways to re-grease the wool. Here are two suggestions:
- Grease the shoe with a mixture of lanolin and beeswax
Apply a wax mixture such as the Lenya impregnation mix containing lanolin, beeswax, soy and jojoba oil to the milled wool using a soft brush or cloth (do not rub too much!) and gently dry it using a hair dryer on a light heat setting. The wax can also be used as impregnation for microfibre parts.
- Apply a lanolin spray treatment
A lanolin spray treatment is an easy way to refresh the water-repellent characteristics of the wool.
Dissolve half a teaspoon of pure lanolin (available at retail outlets or as Adeps Lanae at the pharmacy) in hot water and add a small splash of wool detergent that acts as an emulsifying agent. Put it in a small spray bottle, shake well and fill with lukewarm water. Spray on the milled wool and let the shoes dry naturally – preferably upside-down on a laundry rack, not on the heater.
Have a one of a kind winter, together with a one of a kind Wolf 🙂